Features
Seems these are not available, the company who made them closed down in 2016. Hopefully a new company will make them again and we will try to get more.
Serial Play Style - loops play one after the
other like the Rang
� Plus Serial Master Play
Style
- In addition to playing loops one after the other, there is a cool
type of sync in the Serial Play Style where two loops can play simultaneously.
If loop 3 is recorded first, it will become the master loop, otherwise it's just
another loop and there is no master. If loop three is master, it can play along
with the other loops. So at one time you can play loops 1 & 3, 2 & 3, 4
& 3, but not 1 & 2, etc. Loops 1, 2 and 4 will be created so they are a
multiple of the length of the master. For example, if master loop three is 4
seconds long, the other loops will be 4, 8, 12, 16... seconds long.
- Here's
the purpose. For serial style loopers it's nice to have a rhythmic background
behind the melodic loops. Mute the strings and record a short "chika-chika" or
beat on the sides of your acoustic axe. This rhythmic master loop can then play
along with any other loop.
3 or 4 loops - your
choice
Stacking - "stacking" is adding a part to a
loop
Undo/Redo - the last part stacked can be muted, then played again
or rerecorded
Erase - loops can be erased one at a time or all at
once; a loop can be erased while another plays
Copy Loop - a loop can
be copied whether it is playing or not
Copy Live - this enables
"re-sampling" and is very powerful; the pedal's output is routed to a new
loop
Octave - loop(s) plays at half speed and an octave
lower
Reverse - loop(s) plays backwards Once - loop(s) plays
one time through then stops or if already playing, it stops at its
end
Fade - loop(s) fade in or out with one button press; fades can be
3 to 43 seconds
Reverse Solo - this is an effect and enables you to
create reverse leads live
Two Sample Rates - 48KHz or 24KHz, both with
20 bit samples; through signal is always 48KHz with 24 bit samples
Thru
Mute Function
- turns off through signal Expression Pedal Volume
Control
- simply plug in an expression pedal and it will be the master
playback volume control
Loop Playback Volume Knob - this is always
available to set loop playback volume
Decay Rate Knob - sets the rate
at which earlier parts fade when new ones are added
Stereo or Mono -
recording and playback will be stereo or mono depending on which of the Smart
Jacks you use
Smart Jacks - the Rang� III
senses which jacks are being used and provides different signal routing
options
The Boomerang� III chassis is the same
wedge shape as the original but smaller. It's footprint is 6" (front to back) by
9" (side to side) by 2" tall, and weighs less than 3 lb.
We
will ensure the III is easy to operate and as intuitive as the Plus, but it will
be deeper if you want to explore the new features.
|