Features
CATHEDRAL -
NEW in Sept, 2009! Discontinued in mid 2020
Enter the Cathedral and surround your music with the aria of divine presence.
True stereo reverbs reveal your inspirations while programmability recalls your
spirit of creation. The Cathedral is the performer's mantra creating the perfect
space for your instrument or voice while offering an elegance that takes your
music to a higher ground.
- 24 bit AD and DA converters
- True stereo inputs and outputs
- 8 programmable reverb styles with the ability to load and save
- Tap Tempo to set pre-delay section
- Damping/Tone control available for each reverb mode
- Grail Spring, Accu Spring, Hall, Room, Plate, Reverse, Grail Flerb, Echo
- Hold tap tempo for infinite reverb ** See optional remote EXP jack
Ships with USA 120V Power Supply
US96DC-200BI, or runs off of your normal Boss style power supply like the Pedalpower2+. Optional Euro or UK power supply.
These appear to be TRUE BYPASS, when OFF the signal goes directly from the mono input to the mono output, and from the second
input to the second output. If you only plug into the MONO input, then both outputs get connected directly to the input.
There are no buffers, when OFF the signal passes even without power. Modification: We can add a jack to the pedal so you can easily control the INFINITE settings. Normally, you need to hold down the TAP TEMPO jack to do this. With our mod, you can plug an external switch (latching, mono plug) into the new jack, and just press it once for infinite, and again for normal. You need to be in the NORMAL mode for the existing tap-tempo button to function. You can get one of our Marshall Switch Boxes for a cheap switch, the one with LED will light the LED up when it's in NORMAL mode and off when in INFINITE mode. Or use your own switch, for example one in the Ernie Ball volume pedal with switch or the external control switch on the Van Amps reverbs.
|
