|
|
|
|
|
|
|
|
|
|
|
|
|
|
Analog Man carries the Power-All Extension Power Cable Cable-Black. if you need one of your power cords to be a little longer, this will do it.
|
|
CABLE - GREY BATTERY SNAP JUMPER
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 SPOT or Power-All pigtail adaptor for 3.5mm 1/8" power jacks. Plug any Boss style power supply plug into the female end, and plug the 1/8" (3.5mm) male end into your pedal. Works with TS808, old MXR, old EH, Rat, etc.
|
Analog Man carries the Voodoo Labs Standard 18" Cable. Standard 18" cable like those included with the Pedal Power 2. Has normal Boss style power plugs on each end, available with angle or straight ends.
|
Analog Man carries the Voodoo Labs 1/8" Male End Cable. Allows the Pedal Power 2 to power older MXR and EH style pedals with power jacks that accept 1/8" male ends. Also the Klon Centaur, some Proco Rats, etc.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Analog Man carries the PPL6 Voodoo Labs Line6 style Reverse Polarity 18" Cable. Has a 2.1mm straight plug on the power supply end and a 2.5mm straight RED plug on the effect end. This is the cable for the Eventide. Line6 modelers. VL Pedal switcher, some EH pedals.
|
Analog Man carries the PPREV-R Voodoo Labs Reverse Polarity 18" Cable. We have these cables with 2.1mm right angle plugs on each end. This is the cable for the MOOGERFOOGER pedals and other reverse polarity effects pedals like Fulltone 69, etc.
|
Analog Man carries the Voodoo Labs Battery Clip Cable. Allows you to power your 9V battery effects that don't have an external power jack. Great for powering vintage effects that you don't want to modify like a Fuzz Face or Cry Baby wah.
|
|
|
