Comes with USA power supply. 9vDC, center positive, 1200mA. The optional UK and Euro 240V supplies are 500mA and should work ok as the pedal draws a steady 300mA.
You can use a Voodoo Labs pedalpower2+ to power these. You need to use the two LINE6 outputs, with our Analog Man Y-Cable combining them both. Then plug the voodoo labs LINE6 style reverse polarity (red) cable between the Y cable and Eventide and you have 9V at 400mA which should work fine. The Y cable and reverse polarity cable are available in our accessories area, voodoo labs cables section.
Or check out the new Voodoo Labs
ISO-5 power supply!! which can power this pedal and many more.
Analog Input/Output |
Input impedance |
500K ohms |
Output Impedance |
470 ohms |
Recommended Load Impedance |
10K ohms or greater |
Connectors |
Input 1 (mono) |
� inch mono phone jack |
Input 2 |
� inch mono phone jack |
Output 1 (mono) |
� inch mono phone jack |
Output 2 |
� inch mono phone jack |
Expression Pedal |
� inch mono phone jack |
Aux Switch |
� inch stereo phone jack |
USB |
Type B Socket. Use 2.0 cables only. |
MIDI In |
Five pin DIN (Female) |
MIDI Out/Thru |
Five pin DIN (Female) |
AC Adapter Jack |
Power Supply included (see below) |
Physical |
Power |
9 VDC, 1200 mA, Tip hot (+) |
Dimensions |
English: 4.8" (H) x 7.5" (W) x 2.12" (D) Metric: 122 (H) x 190 (W) x 54 (D) mm |
Weight |
2.15 lbs, 1kG |
Expression pedal control
Eventide Stompboxes will work with any Expression Pedal that is a simple resistive load (potentiometer) with a max value of 25kOhms. For the best performance we recommend the Ernie Ball VP Jr. 25k. Connect the Output to the Eventide Stompbox Expression Pedal Input.